JADE X Prime
(1 customer review)

Original price was: $599.00.Current price is: $420.00.

Available Options:

Clear
Add a custom tune?
Add to Cart
FAQs

Feel the Unreal

For the rider that needs a bit more than a set it and forget it platform, this is our new Prime Series. Externally adjustable high and low speed compression adjust give you full control over the ride feel of your shock. From professional enduro races, to local PR conquests, the new Prime series excels across disciplines and terrains.  Enduro, trail, and e-bikes alike benefit from the maximum adjustability and controlled nature of the Prime Compression circuit. 

After hundreds of hours between trail testing and dyno runs, we’ve fine-tuned our piston & shim settings to deliver excellent adjustability without any harshness. We also worked to reduce adjustment overlap, meaning the adjusters have far less effect on each other offering you precise control over the ride feel.

 

SPECS

Damper:

Prime Damper | Low-Speed Compression | High-Speed Compression | Rebound | Bladder Pressure Adjust

Spring Features:

Coil Spring Preload

Additional Updates

• The air bladder system has been refined with an updated bladder material, end cap seal, and valve core.  These small changes allow the use of reduced air pressure in the system, which in turn reduces pressure loss.

• All-new sealhead design that utilizes updated and sized bushings, which greatly reduces friction under side-loading.

• New eyelet and shaft features increased thread and shaft overlap, which delivers improved strength and better resists lateral load forces created by some frame designs.

• All-new preload adjuster and spring clips are easier to rotate and integrate perfectly with the Jade X  Prime’s updated design aesthetic.

• New and improved rebound knob profile, which is more finger (gloved or gloveless) friendly, with improved detent clicks, making it easier than ever to find your desired setting.

Metric Sizes:

250×75

250×70

230×65

230×62.5

230×60

210×55

210×52.5

210×50

*NOTE: Prime shocks will NOT fit the following Specialized models:

Stumpjumper, Stumpjumper EVO, Turbo Levo.

Prime shocks WILL fit: Turbo Levo SL (2023+) and Turbo Kenevo SL (2022+)

Trunnion Sizes:

225×75

225×70

205×65

205×62.5

205×60

185×55

185×52.5

185×50

*NOTE: Prime shocks will NOT fit the following models:

Orbea Wild.

Tech Info

Technical Info


Select Category to Download PDF:

You may also like

Factory Pump
$24.95
ProRate Spring
$130.00

We now offer the LS (light steel) spring for the Jade Coi...

LS Spring Jade/Jade X
$100.00

We now offer the LS (light steel) spring for the Jade Coi...

Upper Shock Mounting Hardware
$15.00

Eyelet shocks require two (2) sets of mounting hardware (...

Lower Shock Mounting Hardware
$15.00

Eyelet shocks require two (2) sets of mounting hardware (...

CUSTOMER REVIEWS

Average Customer Ratings
Overall (1)
  1. Samuel Stallings • 174 days ago
    Excellent

    Just chucked this on my Intense Tazer. Huge upgrade from the x2 that was on it’s second blowout. Much, much more plush, but just as poppy (maybe more?), even with the linear spring. No longer singing my lower back on sharp edge hits, just eats them up, but still very playful. Pedal platform might even be a bit better than the air can. Dialed in about perfect with the recommended starter settings. Nailed the sag out of the gate. Made a quick call in to DVO to double check my thoughts on spring weight and they were spot on. No clue on longevity, but it has to be better than the x2, and guessing by how helpful they were on the phone they will take of issues if they come up. Highly recommend.

Add a review

YOU MAY NEED THESE

Jersey: Tech
$35.00
Tee: Checkers
$15.00
Topaz Gen 3
$350.00

The next generation of To...