Topaz T3Air

$500.00Buy Now

Intended Uses:

  • Trail
  • Enduro
Buy Now

OVERVIEW & SPECS

Why Topaz T3Air?

The highly anticipated DVO air shock has landed. We pent two years of development time to craft an air shock the could stand up to the abuse from the best riders in the world.

Air volume is easily tunable via air volume spacers that can be removed or installed in a matter of minutes. Unmatched small bump compliance and damping is achieved from a bladder and loader style compression unit. Cooling fins on the reservoir allow heat to effectively dissipate from the shock keeping temperatures low and damping consistent. The T3 Compression adjust gives you three compression settings for pedaling, traversing, and descending.

 

 

 

 

Spec

  • Adjustents
    T3 Compression, Rebound, Adjustable Air Can Volume, Badder Pressure Adjust
  • Features
    High Flow Jade Piston, Cooling Fins, High Quality Trelborg Seals
  • Hardware
    15mm Igus Bushings, Mounting Hardware w/ 6mm, 8mm, or 10mm Options
  • Weight
    330g.
  • Standard Sizes
    216x63.5
    216x57.5
    200x57
    200x51
    190x50
  • Metric Sizes
    230x65
    230x62.5
    230x60
    230x57.5
    210x55
    210x52.5
    210x50
  • Trunnion Sizes
    205x65
    205x62.5
    205x60
    205x57.5
    185x55
    185x52.5
    185x50
    165x45
    165x42.5
    165x40
  • Specialized Size
    StumpJumper 197x47.6 | Enduro 216x57

TECHNOLOGIES

  • Air Volume Tuning

    The new Topaz allows you to tune the volume in both the positive and negative side to achieve a more progressive or linear feel. This is done with the provided tuning bands that come with your DVO Topaz. The tuning bands can be installed in the shock in a matter of minutes and in some cases without having to remove the shock from the bike.

  • Cooling Fins

    Cooling fins on the reservoir keep the shock running cool and consistent in the harshest conditions. The small reductions in material allow heat to dissipate quicker to manage the build up of heat. The shock will retain compression and rebound damping for a longer amount of time offering ultimate performance on the roughest terrain.

  • T3 Compression adjust

    “On the Fly” compression makes it quick and easy to switch into the various compression settings. Open for rough descents, mid for added support, and closed for the firmest compression.

  • Adjustable Bladder

    Bladders are located in the reservoir of the rear shock and take the place of a traditional IFP or internal floating piston. They both have the same purpose but completely different ways of executing it. That purpose is to seperate the air from the oil. A bladder is basically a ballon which is filled with air and seated to the end cap. The bladder is filled with a high PSI to push back against the oil which creates pressure in the system. As the shock is compressed, oil flows through the the system and starts to compress the bladder.

    When the shock goes to extend again, the bladder pushes the oil back in the opposite direction. This decreases the chances of what’s called cavitation. Cavitation is when there is a gap in the oil caused from air bubbles and creates a temporary loss of damping. Here’s an example of cavitation. Picture turning on a hose, what happens as the water is pushing the air out of the line? Water intermittently shoots out in between gaps of air. This same situation happens in suspension causing a loss of damping.

    The real benefit of using a bladder over an IFP is when the shock is working dynamically or in “riding situations”. As the shock is compressing and rebounding at a high velocity, it can sometimes have a difficult time changing directions. An IFP usually has a moment of hesitation in that situation due to stiction between the outer O-ring and the inside surface of the reservoir. With a bladder that can’t happen and you get unmatched small bump sensitivity with a seamless transition from compression to rebound.

  • CNC | Forged Exterior

    Every detail matters. The exterior of the shock is machined and forged with the highest quality materials available, giving the shock a brilliant and durable finish.

     

  • Seamless Integration

    For riders looking to enhance the performance and ride quality of their Specialized trail bikes, the Topaz is now offered in a Specialized compatible version working with the Stump jumper and Enduro models. It bolts straight into the stock link and hardware. Plug N’ Play!

QUICK LINKS